Description
This Power Supply Cap Kit will work on Williams D8784 Arcade Linear Power supplies used on games such as Joust, Robotron 2084, later model Stargate, Sinistar, Bubbles, Moon Patrol, and Blaster or any other game with this power supply. This “Mega Deluxe Cap Kit” has a total of 9 Capacitors which includes the 18,000uf Axial capacitor and two zip ties to tie it down to the PCB. All capacitors are 105c in this kit. All radial capacitors in this kit are Top quality Nichicon low ESR / high hour rated and C14 is a radial 10mm lead spacing cap to fit the board which has 12.5mm and 10mm lead spacing on that location so make sure to use the 10mm location. I have never seen another vendor kit with a 105c axial capacitor for location C10 (18000 uf 25v) included but this kit does because we had them built special for us to put in the kit. All of our Cap Kits / Get Well Kits include a sticker so you can place it on the PCB to help you keep track of the work you did and when it was done. 9 Capacitors included in kit with great instructions and we include a map custom made with photoshop that we created to aide in the installation. We stock most other components that may be needed to repair these power supplies.
KurtNowak (verified owner) –
Awesome kit, even comes with a map showing the orientation of the replacement cap
Cysnake (verified owner) –
Definitely needed to compliment the mega deluxe power supply rebuild kit! Best quality caps around!
cklinejr (verified owner) –
Great cap kit, it’s nice to have the large 18,000uf cap as an Axial. I found bending the leads 45 degrees about an inch from the end gets them to line up with the spacing of the holes for the original giant cap.
Sasha (verified owner) –
Quality caps, that are well put together with information in the kit. Excellent stuff.
Robert Perkins (verified owner) –
Great kit – Nice to have the board functioning properly. Great directions to simplify install.
braedel (verified owner) –
I’ve probably used 50 of these by now. This is a fantastic kit and have never had any issues. The capacitors fit as they should and I’ve verified the values with a B&K tester; All up to spec or above! Great Kit!
Kenneth Lacey (verified owner) –
Great kit, makes it easy to rebuild and not have to search for individual caps
CharlieG (verified owner) –
Worked great to help bring my Robotron power supply back from the dead.
rogerxy (verified owner) –
High Quality components helping my Moon Patrol back to life!
Jared Bresee (verified owner) –
Where did this a while back. It was perfect to help bring back my Williams game.
Oldworldman (verified owner) –
Great quality Caps for my awesome Williams power supply rebuild!
Voltages were spot on after installation!