Description
Electrohome G05-802 and G05-805 arcade Monitor Cap Kit 105C 100% Nichicon Capacitors. “Mega Deluxe Cap Kits” Our kits have some of the BEST quality, low ESR, and longest life capacitors included. All of our Cap Kits / Get Well Kits include a sticker so you can place it on the monitor to help you keep track of the work you did and when it was done. 11 Capacitors included in kit with great instructions. NOTE: The Two Filter caps for this chassis are 6800uf 50v and they are not included in the kit but can be purchased separately on our site. We have two versions on our site and either will work but the snap in capacitors are a much higher hour, longer lasting then the radial capacitors on our site and we recommend the Snap In capacitors.
ManiaMan (verified owner) –
This kit fixed some funky wavy lines on my monitor. It also took out the breathing effect common on Vector displays. The picture has never been clearer. Should have done this a long time ago!
[email protected] (verified owner) –
best caps, complete kit at the lowest price. And AP&R also have the other parts needed to bring your G05-802 back to life. Everything was IN STOCK and delivered asap (3 days for me).
GREG POWERS (verified owner) –
This along with the filter caps were just what the Dr ordered! My friend’s Asteroids Deluxe monitor is looking great again. He cant wait to top my score now thanks to Arcade Parts and Repair.
Jared Bresee (verified owner) –
Perfect set for your Vector monitor ordered three of these bad boys all at once and my monitors are going strong. Don’t be lazy by the kit and the filter cap and you’ll have some working boards and monitors again
cklinejr (verified owner) –
Great kit if you already have a stock of the transistors.
will shaffer (verified owner) –
2 of the capacitors won’t be needed if you have an issue 5 pcb. I recommend picking up the transistors with this (3792 and 3716).
pjlinton (verified owner) –
Great capkit. As others mentioned, a couple of caps left over if you have issue 5 chassis. No worries.
The reminder in the included sheet to remove and replace solder on the header pins is a “must do”. Every one of my headers had a cold solder or 3. Do it while you have the boards out for the capkit!
I’ve ordered 3 more kits for my other projects.
tbisque (verified owner) –
GREAT.
Now I wish that the kits actually came with the deflection board set of “Filter” caps as well (2 of them). And it doesn’t come standard with the 4 bottle cap type resistors stuck to the side of the metal chassis either.
In my case after checking each step of the way it took replacing all of these to get the screen to be rock solid. For those that don’t know to bother with the Filters on the deflection board or those other resistors on the side of the metal chassis FYI. If you want to do it right get all of them!
Other than yahoo.
Craig Baker (verified owner) –
Great cap kit, and nice upgrades in most locations. Even includes instructions and notes where common slip ups happen.
robotworkshop (verified owner) –
This kit makes it very convenient to recap an old G05 monitor. Have another to refresh soon and this has everything needed to do it. All matching quality parts too.
Gar Nelson (verified owner) –
Top notch as always, nice to get proper, specific kits rather than universal kits with tons of extras you may not need.
Troy Gibbs (verified owner) –
You can always trust that the cap kits from ArcadePartsandRepair. com are the best quality and always accurate. Don’t settle for inferior products from ebay or the likes. Thanks for supporting this hobby!
felinfoel (verified owner) –
I had a G05 that and left half of the screen was missing/collapsed.
I just recapped it with this kit (plus the filter caps), and also reflowed the solder to the connectors and heat sink transistors. The monitor looks nearly new now, the picture is locked in.
Kustomcade (verified owner) –
Not much to say except I won’t buy capkits anywhere else but here, never had an issue, but when you use quality caps, why would you have an issue, I’ve capped hundreds of monitors and I’ll keep comin here for my parts!!
B.Harms (verified owner) –
Same thing everyone else says! Great product, fast shipping, etc…. THANKS!
Jared Bresee (verified owner) –
Super awesome kit as usual. Looks like this is my second time ordering them. This is for another monitor that somebody had recapped with cheap parts. I say always get your capacitor kits from APR. Peter always gives you the highest temperature, and hours rating capacitors. The caps in this kit are super fresh ready to go! If you’re going to spend the time recapping a monitor, both your time and your chassis deserve the best. They deserve Arcade Parts and Repair kits.
Jay Hall (verified owner) –
Great cap kit, got it working old school. There’s no school like the old school.
Kurt Nowak (verified owner) –
Another monitor brought back to life!